Furnaces

Gas furnace replacement, priced before anyone visits.

80% to 97% efficient Day & Night furnaces, or a heat pump with a new furnace as backup. Installed by our own crew in Seattle and King, Snohomish and Pierce counties.

Day & Night Elite Dealer · Mitsubishi Electric Diamond Contractor

Installed prices

Furnace prices, smallest size in each series.

Installed and permitted, with sales tax. Your house sets the size, and the instant estimate prices yours.

Standard efficiency

Day & Night 80% single-stage gas furnace

From $6,500installed, with sales tax

Vents through your existing chimney or metal flue, which usually makes it the lowest price to install. Two-stage from $8,200.

High efficiency

Day & Night 96% single-stage gas furnace

From $8,000installed, with sales tax

Turns 96 cents of every gas dollar into heat instead of 80, and vents through plastic pipe to the outside. Two-stage from $9,500.

Top of the line

Day & Night 97% modulating gas furnace

From $10,900installed, with sales tax

Adjusts its heat in small steps for the most even temperatures, with a variable-speed blower.

Add a heat pump

A heat pump with a new high-efficiency furnace as backup starts at $16,900 installed, and adds real cooling for the heat weeks. Heat pump prices

What moves the number

Venting (a chimney liner or new plastic venting), gas and electrical changes, a condensate pump, and the size your house needs.

FAQ

Furnace questions

80% or 95% and up?

An 80% furnace vents through your existing chimney or metal flue and usually costs the least to install. A 96% or 97% furnace turns more of every gas dollar into heat and vents through plastic pipe to the outside. The instant estimate prices both for your house.

Should I replace my furnace with a heat pump instead?

Often the best answer is both: a heat pump for most of the year with a new high-efficiency furnace as backup for the coldest nights. That setup also adds cooling. A furnace on its own doesn't qualify for heat pump rebates.

How long does an install take?

1 to 3 days for most systems. We cover floors, clean up daily, and leave the permit record with you.

How long is your labor warranty?

Essential and Advanced systems include a 2-year labor warranty. On Ultimate, our top tier, the labor warranty matches the factory warranty on that equipment: 5, 7, 10 or 12 years.

Who comes out for the design consultation?

Devan Amling, our Director of Operations, or one of our senior Design Consultants. They scan the house in 3D, build a room-by-room ACCA Manual J load calculation from the scan, check the ducts and electrical panel, and you get a firm price that holds for 30 days. Alex Yi, the owner, reviews every design before you see a price.

How do you size the system?

From a 3D scan, not a rule of thumb. We scan your house with a LiDAR scanner (Conduit Tech) and build an ACCA Manual J load calculation from the scan, room by room. Most quotes are sized by square footage or by matching the old unit. An oversized system short-cycles, runs louder and wears out sooner; an undersized one can't keep up in a cold snap.

See your price in about a minute.

Answer a few questions about the house and see installed prices for three real systems, with sales tax.

See my price